Knowledgebase
How to check if the NAS is a faulty unit?
Posted by Daniel Orme on 03 January 2012 02:05 PM

If your NAS is not responding properly, please do the following to check if the NAS is a faulty unit:

  • Turn on the NAS without hard disk drives.
  • You will hear the first beep upon pressing the power button, and another beep about 2 minutes later.
  • If you did not hear the second beep, there might be a hardware problem with the NAS. Please contact your local distributor/reseller technical support. 

Note: Make sure the alarm buzzer option for system operations (startup, shutdown, and firmware upgrade) has been enabled in “System Administration” > “Hardware” on the administration page of the NAS.

Caution: The NAS must be repaired by professional technicians, do not try to repair the server yourself.

 

Applied Models: All NAS Series

(9 vote(s))
Helpful
Not helpful

Comments (0)