Knowledgebase
Why the smart fan speed of the REXP expansion unit did not increase when it displayed the system overheat on the dashboard?
Posted by Albert Shan on 15 January 2016 03:07 PM

This is because of the false alarm before it reaches to the temperature threshold of the expansion unit. 

There is a JBODTempDashboard QFix released to resolve this false alarm of the system overheat on the dashboard of QTS.

Before applying this QFix, please be aware that
1. This QFix must be applied to QTS version 4.2.0 (build 0101) version ONLY.
2. It is not necessary to apply this QFix after next official QTS firmware release. (after build20160115) 

After downloading below QFix, please extract the file and then update this QFix through the firmware update page.

http://download.qnap.com/Storage/tsd/qfix/JBODTempDashboardFix_1.0.1_20160114_x86.zip

 

(0 vote(s))
Helpful
Not helpful

Comments (0)