How to upgrade Samba package version from 3 to 4
Posted by Daniel Orme on 02 March 2015 07:37 PM

If you have a supported NAS model, you can follow below steps if required to manually update the Samba package version to 4.0.


  1. Make sure the NAS firmware version is 4.1 or higher
  2. Connect to the NAS SSH terminal
  3. Type the commands below:
    /etc/init.d/ reinstall_samba keep
    /etc/init.d/ restart


  4. Login to Web UI again


NOTE: This operation is performed the user's own risk and may cause unexpected behaviour of previous Samba settings.

(30 vote(s))
Not helpful

Comments (0)